Altneuland · Vol. III, No. 6 · June 1906
180printed page
scan 20 of 32

— 180 —

In order to give the Jordan valley itself an irrigation during the dry months, one could, as already mentioned, build a dam-weir into the river. The valley floor itself lies about 2 m higher than the normal water level of the Jordan; we should therefore have to seek to bring the water level at least 1.8 m higher, in order to raise the level of the ground-water.

If we assume that the Jordan, at the spot where we intend to lay out the dam-weir, has a breadth of 15 m, with a normal water depth of 1.0 m and a mean velocity of 0.6 m, we have a water quantity per second of

Q = 15 · 1 · 0.6 = 9.0 cbm/sec.

Let it be assumed that of this we draw off 5 cbm/sec. sideways through an irrigation ditch, with a damming of 1.8 m. The question now is, how high the weir must become.

[Figure: sketch of a weir cross-section, showing the dammed water flowing over the weir; dimension labels: 0.2 — y — 2 m — 1.8 m — x (height of the weir) — 1 m; at the left, the valley floor ("Sohle der Talsohle") is marked]

We have the above sketch. The formula for the perfect overfall now runs

Q = 0.57 b · y √2 g y.

Since we now have in total 9 cbm/sec., of which we draw off 5 cbm for irrigation purposes,

Q = 9 — 5 = 4 cbm, therefore b = 15 m.

4 = 0.57 · 15 · y √2 g y

4 = 0.57 · 15 √2 g y³

√2 g y³ = 4 / 0.57 · 15

2 g y³ = ( 4 / 0.57 · 15 )²

y = ³√ ( ( 4 / 0.57 · 15 )² · 1 / 2 g ) with g = 9.81

y = ³√ 0.011 = 0.22 m.